Hey mate, sorry to reply only a year later. You probably won’t see this, but fwiw I’m on the Sunshine Coast.
I haven’t done any...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
10 results in 0.0090 seconds.
Keywords
Members
Tags
-
Few more photos..
External wastegate with flex joint added befor running out and through the inner guard and back into the exhaust with a v-band...4 Photos
- 1 like
Leave a comment:
-
A few more photos..
Water hoses running through front panel beside LH headlight to intercooler.
Aeroflow adjustable FPR rubber mounted to...5 Photos
- 1 like
Leave a comment:
-
For fuelling and management I went with a ChipTorque XEDE Processor piggyback ECU. Reason being, its quiet a simple system to wire in and relatively easy...5 Photos
- 1 like
Leave a comment:
-
For intercooling I used a cheap W2A kit from eBay. Main reason was due to space. I could have fit an air/air IC infront of the condenser, but the problem...4 PhotosLast edited by jordan91; 31-03-2022, 12:36 PM.
- 1 like
Leave a comment:
-
For turbo oil feed to the turbo, I used a blank port below the oil pressure switch port, and used a T piece into the oil pressure switch port in order...5 Photos
- 1 like
Leave a comment:
-
The CX racing manifold comes with a 38MM wastegate flange before the turbo. I found that unless you plan on running the exhaust straight up through the...5 Photos
- 1 like
Leave a comment:
-
The CX Racing kit is designed to suit the American market with LHD, and I think it specifically made for the Tacoma and 4-runner. Either way, it does...5 PhotosLast edited by jordan91; 31-03-2022, 12:47 PM.
- 1 like
Leave a comment:
-
Prado 5VZ-FE turbo build
Howdy!
So I've recently completed the project of adding boost to my 2000 model VX auto 5VZ-FE Prado, and thought I'll compile my process and parts...3 PhotosLast edited by jordan91; 31-03-2022, 12:45 PM.
- 3 likes
-
Did you ever rectify this problem Gus90?? I have the exact same issue with my VX and I'm at a bit of a loose end.. thought it might pay to ask before...
Leave a comment:
Leave a comment: