Announcement
Collapse
No announcement yet.
Search Result
Collapse
21 results in 0.0048 seconds.
Keywords
Members
Tags
-
Am pretty sure that 90 Series Prado is not OBD2 compliant anyways....
-
Lower Control Arm - Replace In Entirety or Re-fit Bushes?
When installing new springs/shocks today we noticed one lower control arm bush was not in the greatest of condition (left had side, rear bush) - Serviceable...
-
Thanks,
We did the front lift today and checked them...No play just the small tear in the boot. Lift came out at about 45mm above standard...
Leave a comment:
-
Thanks Jim,
I only got the chance to check your response this evening but over the last few days had pretty well followed your advice and...
Leave a comment:
-
Thanks Mate,
Lift is only minor....40mm - Does this constitute a need to increase their length?...or just desirable?
Happy...
Leave a comment:
-
Front Sway Bar Link - Torn Rubber Boot
Hi,
Climbed under the car today to look at a few things and noticed my LHS front Sway Bar Link boot has torn. Vehicle is getting a suspension...
-
Bilstein/Lovells Vs EFS Shocks/Springs - 90 Series
Ok,
My journey of discovery into a suspension upgrade is getting to the pointy end. I have several options to choose from at differing...
-
Not overly passionate over twin tubes....Moreso just looking for a good setup with a bit of lift for touring and can handle the occasional light 4x4 drive...
Leave a comment:
-
Thanks Mark,
Do you know how the TJM springs compare to King Springs?.....I am assuming they are made by Kings but like OME would be likely...
Leave a comment:
-
Thanks mark,
Appreciate your time and advice in helping me. One thing I do know is that I can probably scrub OME off the list.....The told...
Leave a comment:
-
Where might I find this database?...Is it on this site?
I don't have them installed.....I only have a quote but I have the TJM part numbers...
Leave a comment:
-
Thanks for the input Mark.
In my particular case the focus was initially on new struts/coils (to replace a completely shot front end) and...
Leave a comment:
-
Thanks Brett,
I will double check the TJM part numbers quoted again with their web page....but from memory they quoted me for HD Front 100kg...
Leave a comment:
-
Thanks Jim....That's exactly what I thought. Loading up will be rare for me. I looked through the TJM range and they offer nothing in 50mm lift that...
Leave a comment:
Leave a comment: