What did you do to your 120 today?

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

Finally fitted the full egr blanking plate with the manual mapper, I forgot to put a rag down when fitting the plate, so I had to pull off the bash plate to retrieve it, easy enough though

[hawks667 Member Find all posts View Profile Close hawks667]

Did this....but not upside down..

[The Shire Lurker Find all posts View Profile Close The Shire]

Hi, new to forum so a little catching up to do, bought 03 GXL 18 mths ago with 59k on clock, since then fitted GME TX370 and Milford barrier (2nd hand & got the genuine fitting kit), major service (cost did not impress Mrs G..). Next job is the Toyota over bumper bar. And Nara Ultima 175s, could someone please tell me how to get the oem bumper off without damaging it..enjoying the read fellas, take care

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

Fitted these bad boys, I'll test them out tonight on a road trip.

[LowRange Member Find all posts View Profile Close LowRange]

Fitted these bad boys, I'll test them out tonight on a road trip.

Worst thing about them is when you switch them off, it feels like your regular headlights arent even on.

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

Worst thing about them is when you switch them off, it feels like your regular headlights arent even on.

Yep ain't that the truth, tried them out last night, bloody awesome, I'll have to upgrade the low beam now.

[LowRange Member Find all posts View Profile Close LowRange]

I've had a 4wdsupacentre 3" exhaust for the past 18 months and its been awesome, i noticed they had the muffler delete pipes in stock so i ordered one and fitted it today.

Fitted like a glove and was quick to install. First thoughts are it's loud, quite a bit louder than i was expecting. Going from the stock exhaust to the 3" the increase in sound wasnt huge it mostly just gave it a nicer deeper note, but the muffler delete is very noticeable so the jury is still out on this one dont know if i will keep it or switch back. Not sure if its improved fuel economy yet only went around the block.



Also the other day got a new windscreen fitted after cracking it in the snow. Done by Obrien from $400 fitted, they used an acoustic XYG screen. Guy done a great job, even managed to peel off my national parks pass off the old screen and and restick it like new along with dashcam and hands free mic. Screen quality is ok, theres some slight rippling if i look through it on a sharp angle but it's not noticeable when driving. Also cabin noise is about the same as the OEM screen.

Yep ain't that the truth, tried them out last night, bloody awesome, I'll have to upgrade the low beam now.

I always use https://www.powerbulbs.com/au/ they are a UK company but shipping is fast and they are generally way cheaper than the same product locally. They have 25% off everything with the coupon score

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

I always use https://www.powerbulbs.com/au/ they are a UK company but shipping is fast and they are generally way cheaper than the same product locally. They have 25% off everything with the coupon score

Thanks for the link mate, I just purchased these 1 x PIAA Hyper Arros H4 (Twin) with 25% off that’s incredible

[LowRange Member Find all posts View Profile Close LowRange]

Went for a better drive with the 4wdsupercentre muffler delete and would have to advise against them. Way too noisy, when you open the throttle it sounds like a Mack truck and fuel consumption was up slightly but EGT down. Wifey definitely was not impressed either lol. But it only took 15min to bolt it and give it a try, i will weld in a high flow unit something between a delete and the standard muffler and see how it goes.

Thanks for the link mate, I just purchased these 1 x PIAA Hyper Arros H4 (Twin) with 25% off that’s incredible

No problems, depending on the globe but usually they are much cheaper then elsewhere or getting the globes in places like SuperCheap.

[Hogey66 Senior Member Find all posts View Profile Close Hogey66]

Worst thing about them is when you switch them off, it feels like your regular headlights arent even on.

I found that out the hard way a few weeks ago on my old 90. Flicked the switch for the spotties off and everything went black. Not sure how long I've been driving around with both high beam filaments blown!

[LowRange Member Find all posts View Profile Close LowRange]

Today i fitted up some new DBA T2 4x4 slotted rotors and Bendix heavy duty brake pads on all four corners, and changed out the brake fluid.



I've also got some Bilstein shocks and King springs which i will put in tomorrow time permitting.

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

Low range I’m jealous, but watch this space, I’ll catch up eventually

[LowRange Member Find all posts View Profile Close LowRange]

Low range I’m jealous, but watch this space, I’ll catch up eventually

You will get there mate, it just takes time. I'm extremely fortunate that i have a 2 post hoist in my shed so it makes doing these jobs so much easier (and safer), i'd be lost without it.

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

You will get there mate, it just takes time. I'm extremely fortunate that i have a 2 post hoist in my shed so it makes doing these jobs so much easier (and safer), i'd be lost without it.

No way, not a hoist as well, you don’t live in the Pilbara do you, we could share

[adrian5800 Advanced Member Find all posts View Profile Close adrian5800]

I wish I had the room for a hoist, I've been talking to the wife suggesting we move and she knows without me saying it, it's so I can install one...