Hey Guys,
I have just finished fitted the Platinum Bilstein Package from Darren McRae and Polyairs. Forgot to take the before measurements but it was standard suspension after 4 years and it looked lowered.
The springs were
Front - Ridepro ZC7300
Rear - Ridepro ZC7327
Front Bilsteins circlip was set to the middle groove
I have ARB winch bar (no winch), dual batteries, 40L engel and about 50 litres of fuel when measured.
Measurements after were (measured from bottom of rim)
Front
Passenger - 803mm
Driver - 803mm
Rear (with 5psi in the polyairs)
Passenger - 843mm
Driver - 844mm
Very happy with the ride and the lift achieved.
Cheers
I have just finished fitted the Platinum Bilstein Package from Darren McRae and Polyairs. Forgot to take the before measurements but it was standard suspension after 4 years and it looked lowered.
The springs were
Front - Ridepro ZC7300
Rear - Ridepro ZC7327
Front Bilsteins circlip was set to the middle groove
I have ARB winch bar (no winch), dual batteries, 40L engel and about 50 litres of fuel when measured.
Measurements after were (measured from bottom of rim)
Front
Passenger - 803mm
Driver - 803mm
Rear (with 5psi in the polyairs)
Passenger - 843mm
Driver - 844mm
Very happy with the ride and the lift achieved.
Cheers
Comment