I guess if there aren't any entries for July you start the thread? Not sure if I qualify but here is my shot. The original is sharp.
Gold...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
16 results in 0.0209 seconds.
Keywords
Members
Tags
-
un-offical entries
-
-
You would have to cut the housing and tap to fit the elocker and fab up wiring. Quite common here in the USA. A friend of mine designed a very good wiring...
Leave a comment:
-
Hi all, I built a set for my GX and took apart the factory running boards reusing the plastic and electrical in the sliders. They rely on flexing up to...
Leave a comment:
-
I tow about that setup and have a 2.x" lift and 32" tires. It's flawless. A WDH is only necessary if you have lots of tongue weight and/or no...
Leave a comment:
-
You don't even need to unlock it if you have snow on the roof.
Leave a comment:
-
Re: How long are the front suspension struts?
Just remove the two lower balljoint screws and disconnect the swaybar. Don't separate any...
Leave a comment:
-
Re: difficulty selecting gears. 6spd manual
Try some high quality synthetic. That solved exactly that problem for me in an old Rx7. Synthetic...
Leave a comment:
-
Re: Diff Breathers
Here are a couple of other useful part numbers for you all.
http://www.larsdennert.com/4runner/breather/index...
Leave a comment:
-
Re: 2.5 ton towing capacity
The usa version tows 7000lb with the correct receiver. It has a V8 and rear air suspension though. V6 versions...
Leave a comment:
-
Re: show us ya flex photos
First time out for this truck. I did have the front sway bar disconnected. Smoothed the ride out a b...
Leave a comment:
-
Here's another ARB install
Don't try to figure out the crazy placement. I'm tfel hand drive.
You may want to consider...
Leave a comment:
-
Re: What does the 30A tow fuse in factory fitted bar pwr?
Brake controllers don't vary the current or the voltage to the trailer wheels....
Leave a comment:
-
Re: Electric Brake Controller
I know it's an old thread but if you have a factory tow kit, the wiring will be there. Directly below the...
Leave a comment:
-
Re: FJ Cruiser for Australia
Make sure you are content with the outward visibility both forward and back especially for wheeling. It is...
Leave a comment:
Leave a comment: