Announcement
Collapse
No announcement yet.
Search Result
Collapse
29 results in 0.0045 seconds.
Keywords
Members
Tags
-
No I don't think my economy changed. 9.8 up to 11.6 highway loaded. Diesel auto.
-
Do a search plenty on here about chips. I have a 1kz with a Steinbauer and exhaust. Happy with the result. plenty of torque down low about the same at...
Leave a comment:
-
How can a crush tube, that is there to give correct pre-load on the bearings. Have any thing to do with smooth gear changes???...
Leave a comment:
-
-
I fitted my 2 3/4 beaudesert on the 15/10/08 (time gets away) with no probs. still very happy with it. What i did do though was fit an extra brase from...
Leave a comment:
-
Clackity clack, clackity clack, is that the noise? I could all most guarantee you that it will be the belts or belt, (air con.belt) experiment with a...
Leave a comment:
-
I can't say that it jumped out of it's skin, the 90 has a pretty big and free flowing exhaust any way. But noticed the turbo seems to spool up a lot quicker....
Leave a comment:
-
I have had a Beaudesert for four years now, never any problem, no rattles not noisy
Leave a comment:
-
Just a thought are the injectors holding pressure? which could cause it to flood causing a rich mixture and the cause of hard starting.
Leave a comment:
-
I didn't have to fit a tray! there is a platform already there identical to the right side. Mine being a 2002 and 95 series maybe thats were the differance...
Leave a comment:
-
I have mine on the left, will take a photo on the weekend. very easy to do there is already a platform there. Takes the same plastic tray as the right...
Leave a comment:
-
-
DWG is right, take your time and they are very tight. make sure of a good socket fit. Did mine years ago also, putting the new one on was easy because...
Leave a comment:
-
Gday Gordon, I have a set 2002 95 series. I'll have the measurements for you tomorrow afternoon. Front, rear or both?
Cheers Peter
Leave a comment:
-
I cut a thin peice of ply, and put around the seal to hold it in place. has held it for a couple of years now. Keeps the seal shape and doesn't flop over...
Leave a comment:
Leave a comment: