Announcement
Collapse
No announcement yet.
Search Result
Collapse
398 results in 0.2202 seconds.
Keywords
Members
Tags
-
Perfectly normal, there wasn't only 3 things done
-
The bracket to the sensor is back to front , flip it over , seen it before
Leave a comment:
-
I once had one in the work shop that had a filthy air flow sensor, this vehicle had a massive flat spot as well, couldn't believe the difference after...
Leave a comment:
-
-
how much tread depth do you have?and what sort of tyres are you running
Leave a comment:
-
Check your tyre pressures , known to do this if they are overinflated for the conditions, especially on curves
Leave a comment:
-
Has anybody been fiddling with it? lift fitted etc? it is under high pressure so the oil must have gone somewhere
Leave a comment:
-
Having physically seen a motor run low on on oil after only 200 metres and the big ends are destroyed , push back and go for a new motor, it doesn't ...
Leave a comment:
-
0W30C2 is the recommended oil, even on the penrite site, lighter oils doesn't always translate to higher usage...
Leave a comment:
-
steeper motors do play up but usually because the vanes are sticking , the turbo guys will know when they dismantle , you can see it clearly
Leave a comment:
-
we have seen a few turbo vanes slightly bent lately , the only common issue has been the remap , we have a theory that the vanes are snapping back hard...
Leave a comment:
-
-
How many k's, is the correct oil being used? ( i.e 0w30c2) dealer serviced ?
Leave a comment:
-
if your last software was updated a year ago its about 9 months out of date , new software was released and a new procedure to check the integrity of...
Leave a comment:
Leave a comment: